• TPU 95A Kingroon черный цвет 1.75мм 1кг флекс
  • Гибкий пластик TPU Kingroon черный для 3D принтера Молдова
  • Флекс пластик TPU 95A Kingroon прозрачный для чехлов и прокладок
  • TPU 95A Kingroon прозрачный 1.75мм 1кг гибкий пластик
  • Гибкий пластик TPU Kingroon белый для 3D принтера Молдова
  • TPU 95A Kingroon белый цвет 1.75мм 1кг
1 8

Kingroon

TPU 95A (Flexible)

TPU 95A (Flexible)

450.00 MDL
450.00 MDL
Sale Sold out
Color: Black

14 in stock

In stock

The filament is physically located in our dry warehouse in Chisinau. The data on the website is updated in real time — if a color is available for order, it means the spool is ready for dispatch.

Delivery

Delivery throughout Moldova with Nova Poshta (to branches and parcel lockers) within 24–48 hours.

Delivery cost depends on the weight of the parcel.

Print Settings and Profiles

TPU is highly hygroscopic (it actively absorbs moisture from the air). To avoid severe stringing, we strongly recommend drying the spool in a filament dryer at 50–55 °C for 4–6 hours before printing.

🔹 Specialized Preset for Flex (TPU)
Nozzle Temperature: 225 °C (recommended working range: 200–230 °C)

Bed Temperature (Textured PEI / High Temp Plate): only 30–35 °C (Attention! Do not set the bed temperature any higher. Flexible TPU adheres incredibly well, and overheating the bed can fuse the plastic to the plate, permanently damaging the coating).

Layer Height: 0.2 mm
Retraction: Length 0.8 mm, Speed 30 mm/s (conservative minimum retraction for Direct Drive extruders)
Walls & Geometry:
Top Shell Layers: 7 layers (ensures thin, rubber-like top surfaces do not sag)
Infill Density: 18% | Infill Pattern: Triangles (optimal for maintaining part elasticity and springiness)
Speed: 30 mm/s for all printing movements

Kingroon TPU 95A is a thermoplastic polyurethane with optimal Shore hardness (95A).

This material allows for printing flexible, rubber-like parts even on printers with a Bowden extruder (with correct speed settings), while on direct extruders, printing is as easy as with standard PLA.

The plastic boasts incredible wear resistance, the ability to compress and regain its shape, and to dampen vibrations.

Suitable for:

  • Shock absorbers, dampers, sealing gaskets, and bushings.
  • Protective cases for phones, action cameras, and remote controls.
  • Shoe soles, flexible elements for costumes and masks.

Technical Specifications:

  • Filament Diameter: 1.75 mm
  • Net Weight: 1 kg
  • Extruder Temperature: 210 - 230 degrees
  • Bed Temperature: 40 - 60 degrees (or no heating on masking tape/glue)
  • Recommended Speed: 20 - 40 mm/s (requires slow printing without sharp retractions).
View full details