PETG

The filament is physically located in our dry warehouse in Chisinau. The data on the website is updated in real time — if a color is available for order, it means the spool is ready for dispatch.

Delivery throughout Moldova with Nova Poshta (to branches and parcel lockers) within 24–48 hours.

Delivery cost depends on the weight of the parcel.

PETG is an excellent engineering-grade material. To achieve maximum part strength, we highly recommend using our proven high-strength preset.

🛠️ Preset: Strong — Maximum Part Strength
Nozzle Temperature: 245 °C (high temperature for superior layer bonding)

Bed Temperature (PEI): 75 °C (for perfect PETG bed adhesion)
Layer Height: 0.2 mm (First layer: 0.24 mm)
Line Width: 0.42 mm for all lines
Flow Ratio: 0.985
Pressure Advance: 0.044
Retraction: 0.8 mm @ 30 mm/s
Part Cooling Fan: reduced to 40–50% after layer 3 (allows layers to fuse properly instead of cooling down too quickly)
Wall Order: Inner/Outer (recommended to maximize structural strength)
Speed: First layer — 20 mm/s, Outer walls — 80 mm/s, Inner walls — 120 mm/s.
Slowing down the print speed gives the material enough volumetric time to melt completely in the hotend.